Skip to content
All BC permit guides

City of Enderby

How to get a building permit in Enderby, BC

Where to apply, what Enderby asks for, what it costs, and who issues electrical and gas permits — with links to the city's own forms.

Where to apply in Enderby

In person / download. Building inspection and permit processing are contracted to the Regional District of North Okanagan (RDNO). RDNO only accepts complete applications; Building Permit Application Packages are downloaded from cityofenderby.com or picked up at the RDNO office. No Cloudpermit/ProjectDox online portal.

Official City of Enderby permit page

City of Enderby Planning: Kurt Inglis, Planner — 250-838-7230, kinglis@cityofenderby.com. RDNO Building Inspection: 250-550-3700 (reception) / 250-550-3730 (inspection line), Mon-Fri 8:00am-4:30pm. Technical Safety BC (electrical/gas): 1-866-566-7233.

Who issues electrical and gas permits

Technical Safety BC — RDNO/Enderby explicitly state separate gas and electrical permits must be obtained from Technical Safety BC (toll-free 1-866-566-7233 / 866-566-7233).

electrical
Technical Safety BC
Sending this to City of Enderby instead won't get forwarded — it starts over. On a service upgrade that also pushes out your BC Hydro reconnect, usually the longest lead time on the whole job.
gas
Technical Safety BC
Sending this to City of Enderby instead won't get forwarded — it starts over, and gas work can't be inspected or turned on until the right authority has issued the permit.

Step by step in Enderby

  1. 1

    Confirm zoning before anything else

    Check the property's zone, setbacks, height and lot coverage, and whether it sits in a Development Permit Area. If it does, that approval has to come before the building permit — Enderby won't issue until land use is settled.

  2. 2

    Work out which permits you need

    Structural work needs a building permit from City of Enderby. Electrical and gas are separate and are issued by Technical Safety BC — RDNO/Enderby explicitly state separate gas and electrical permits must be obtained from Technical Safety BC (toll-free 1-866-566-7233 / 866-566-7233). Plumbing is usually part of the building permit.

  3. 3

    Prepare drawings and documents

    City of Enderby asks for: Complies with BC Building Code and City of Enderby Building Bylaw No. 1582, 2015; Site plan and floor-plan / construction drawings; Land title or proof of ownership; BC Energy Step Code — Step 3 (~20% more efficient than base 2018 BCBC), effective May 1, 2023; Owner authorization documentation; New-home warranty registration via BC Housing for new residential construction (or exemption); Registered-professional / engineered drawings and Schedule B for complex work; WorkSafeBC where applicable; Plumbing, mechanical or demolition permits as applicable; electrical & gas via Technical Safety BC.

  4. 4

    Submit your application

    In person / download. Building inspection and permit processing are contracted to the Regional District of North Okanagan (RDNO). RDNO only accepts complete applications; Building Permit Application Packages are downloaded from cityofenderby.com or picked up at the RDNO office. No Cloudpermit/ProjectDox online portal.

  5. 5

    Pay the permit fee

    Fees per RDNO / City of Enderby building permit fee schedule (construction-value based). Confirm the current schedule with Enderby before you budget.

  6. 6

    Plan review, then build to inspections

    The building department reviews against the BC Building Code and zoning; answer any comments quickly. Once issued, post the permit on site and book inspections at each stage — footings, framing, rough-in, insulation, final. Don't cover work before it's inspected.

What Enderby asks for

  • Complies with BC Building Code and City of Enderby Building Bylaw No. 1582, 2015
  • Site plan and floor-plan / construction drawings
  • Land title or proof of ownership
  • BC Energy Step Code — Step 3 (~20% more efficient than base 2018 BCBC), effective May 1, 2023
  • Owner authorization documentation
  • New-home warranty registration via BC Housing for new residential construction (or exemption)
  • Registered-professional / engineered drawings and Schedule B for complex work; WorkSafeBC where applicable
  • Plumbing, mechanical or demolition permits as applicable; electrical & gas via Technical Safety BC

Permit fees in Enderby

Fees per RDNO / City of Enderby building permit fee schedule (construction-value based).

Fees change and vary by project — confirm the current schedule with City of Enderby.

Permit types in Enderby

Building permit

The core municipal approval to legally construct, add to, or structurally alter a building, issued after plan review confirms compliance with the BC Building Code and local bylaws.

Plumbing permit

A trade permit (often issued separately from, or alongside, the building permit) authorizing installation, extension, or alteration of potable water, drainage-waste-vent, and connections to municipal water/sewer, verified against the BC Plumbing Code.

Demolition permit

A municipal permit to tear down or remove a building or structure, conditional on safe utility disconnections, a pre-demolition hazardous-materials (asbestos) survey and abatement, and — in many cities — recycling/deconstruction requirements backed by a refundable deposit.

Worth knowing about Enderby

Enderby offers case-managed development services at its front counter but building inspection is delivered by RDNO. Building inspectors: Dwayne Skublen and Lance Riemer. Book inspections min. 2 working days ahead via RDNO Building Inspection Line 250-550-3730 (provide permit number, civic address, contact name/phone, date, required inspection type).

Enderby permit questions

Where do I submit a building permit application in Enderby?

In person / download. Building inspection and permit processing are contracted to the Regional District of North Okanagan (RDNO). RDNO only accepts complete applications; Building Permit Application Packages are downloaded from cityofenderby.com or picked up at the RDNO office. No Cloudpermit/ProjectDox online portal.

Who issues electrical and gas permits in Enderby?

Technical Safety BC — RDNO/Enderby explicitly state separate gas and electrical permits must be obtained from Technical Safety BC (toll-free 1-866-566-7233 / 866-566-7233).

How much does a building permit cost in Enderby?

Fees per RDNO / City of Enderby building permit fee schedule (construction-value based). Fees vary by project, so confirm the current schedule with City of Enderby before budgeting.

What do I need to apply for a building permit in Enderby?

City of Enderby asks for: Complies with BC Building Code and City of Enderby Building Bylaw No. 1582, 2015; Site plan and floor-plan / construction drawings; Land title or proof of ownership; BC Energy Step Code — Step 3 (~20% more efficient than base 2018 BCBC), effective May 1, 2023; Owner authorization documentation; New-home warranty registration via BC Housing for new residential construction (or exemption); Registered-professional / engineered drawings and Schedule B for complex work; WorkSafeBC where applicable; Plumbing, mechanical or demolition permits as applicable; electrical & gas via Technical Safety BC.

Anything else to know about permits in Enderby?

Enderby offers case-managed development services at its front counter but building inspection is delivered by RDNO. Building inspectors: Dwayne Skublen and Lance Riemer. Book inspections min. 2 working days ahead via RDNO Building Inspection Line 250-550-3730 (provide permit number, civic address, contact name/phone, date, required inspection type).

Sources

General information only, not legal or code advice. Requirements vary by project and change over time — always confirm what applies to your job with City of Enderby before you build.

See what's being built in Enderby

Construction Radar turns building-permit data into a live map of real construction jobs — who's building, what it's worth, and who to call.

Start for free