How to get a building permit in Anmore, BC

Step by step in Anmore

1. 1

   Confirm zoning before anything else

   Check the property's zone, setbacks, height and lot coverage, and whether it sits in a Development Permit Area. If it does, that approval has to come before the building permit — Anmore won't issue until land use is settled.

2. 2

   Work out which permits you need

   Structural work needs a building permit from Village of Anmore. Electrical and gas are separate and are issued by Technical Safety BC (Village explicitly does NOT issue electrical or gas permits — applicants contact Technical Safety BC directly). Plumbing is usually part of the building permit.

3. 3

   Prepare drawings and documents

   Village of Anmore asks for: Site plan (zoning compliance, topography, tree coverage, setbacks, drainage); Floor area + basement floor area calculations; Elevation views (average finished grade, building height, FDWR ratio, spatial separation); Section views and fenestration details (Zone 5); BC Building Code 2024 (BCBC) compliance; BC Energy Step Code Compliance Checklist for Part 9 buildings; Structural/geotechnical engineered drawings with P.Eng wet seal, permit-to-practice number and proof of insurance (when applicable); Excavation/shoring plans for depths >1.2m or slopes >20%; retaining wall drawings for walls >1.2m; Owner Authorization Form for anyone acting on owner's behalf; ESC plan with Schedule D Letter of Assurance; arborist reports; Schedule B & C-B for engineered guards; All trades must hold a valid Anmore business licence.

4. 4

   Submit your application

   Online digital form submissions preferred (Village of Anmore website forms); no third-party portal like Cloudpermit. In person / email backup: village.hall@anmore.com

5. 5

   Pay the permit fee

   Building permit fees not published on page; Soil Deposit Permit is $100 (90-day validity, $5,000 refundable bond). Contact Village Hall for building fee schedule. Confirm the current schedule with Anmore before you budget.

6. 6

   Plan review, then build to inspections

   The building department reviews against the BC Building Code and zoning; answer any comments quickly. Once issued, post the permit on site and book inspections at each stage — footings, framing, rough-in, insulation, final. Don't cover work before it's inspected.

Anmore permit questions