How to get a building permit in 100 Mile House, BC

Step by step in 100 Mile House

1. 1

   Confirm zoning before anything else

   Check the property's zone, setbacks, height and lot coverage, and whether it sits in a Development Permit Area. If it does, that approval has to come before the building permit — 100 Mile House won't issue until land use is settled.

2. 2

   Work out which permits you need

   Structural work needs a building permit from District of 100 Mile House. Electrical and gas are separate and are issued by Technical Safety BC issues electrical and gas permits (standard BC pattern; not identified as a District function). Plumbing is usually part of the building permit.

3. 3

   Prepare drawings and documents

   District of 100 Mile House asks for: At least one set of plans plus a completed Site Plan Worksheet; Owners Undertaking where the applicant is not the property owner; Contaminated Site Declaration Form; Compliance with BC Building Code and District Building Bylaw No. 695.

4. 4

   Submit your application

   In person / mail — no online portal indicated. Submit at the District office; phone the office for inspection scheduling.

5. 5

   Pay the permit fee

   Construction-value-based, tiered: from $200 (projects under $1,000) scaling up for projects over $200,000. Plus application fee ($200), plan processing fee (50% of permit fee, capped at $2,000), and clean-up bond ($500 residential / $2,500 commercial). Confirm the current schedule with 100 Mile House before you budget.

6. 6

   Plan review, then build to inspections

   The building department reviews against the BC Building Code and zoning; answer any comments quickly. Once issued, post the permit on site and book inspections at each stage — footings, framing, rough-in, insulation, final. Don't cover work before it's inspected.

100 Mile House permit questions